Key takeaways
- A safe default is a 1080 by 1920 H.264 MP4 with AAC audio, at the same frame rate as your source.
- Platforms re-encode every upload, so clean source quality and fewer re-exports matter more than a huge bitrate.
- Never upscale low-resolution footage or change frame rate for no reason.
- Check the platform's current upload specs before you lock a preset.
The safest export for a short clip is an MP4 file with H.264 video and AAC audio, at 1080 by 1920 pixels, at the same frame rate as your source, with a video bitrate roughly between 8 and 15 Mbps. Platforms re-encode every upload, so your job is to hand them a clean file, not the biggest one you can make.
That is a starting point, not a law. Specs move, so confirm current upload guidance on each platform's help page, and test one upload before you build a preset around it.
The default preset
| Setting | Value | Why |
|---|---|---|
| Container | MP4 | Accepted everywhere |
| Video codec | H.264 (AVC) | Plays on every device and platform |
| Audio codec | AAC | Standard pairing with H.264 |
| Resolution | 1080 x 1920 (9:16) | Fills a phone screen |
| Frame rate | Same as source (usually 30 fps) | Avoids stutter |
| Video bitrate | About 8 to 15 Mbps | Holds detail through re-encoding |
| Audio bitrate | 128 to 192 kbps | Clear speech and music |
| Audio sample rate | 44.1 or 48 kHz | Standard |
| Color | Standard SDR (Rec. 709) | HDR often looks washed out after compression |
Save this as a named preset in your editor. Consistency across posts matters more than squeezing a few extra points of quality out of one.
Why a huge bitrate does not help
Every platform compresses what you upload to fit its own pipeline. Your file is an input, not the final product. Two consequences:
- Past a point, more bitrate is wasted. A 50 Mbps file and a 12 Mbps file often look similar after the platform's own compression, and the big one uploads slower and fails more often on a weak connection.
- What you can control is the starting quality. A clean source, no upscaling, and one export is what survives re-encoding best.
If a clip looks soft after posting, the cause is almost never that you picked 12 Mbps instead of 20.
Resolution: stay at 1080 by 1920
A 9:16 vertical clip at 1080 by 1920 is the standard. Rules:
- Do not upscale. If your source is 720p, exporting at 1080p adds file size, not detail. Sometimes a smaller clean frame looks better than a big soft one.
- Do not export wider than the platform shows. Anything above 1080 wide is cropped or scaled down by the viewer anyway.
- Match the frame you designed. If you built the project at 1080 by 1920, export at that size, not at a size the editor suggests.
For the shape and safe zones, see vertical video aspect ratio for clips in your editor's project settings, and read the placement rules in the brief if you post a logo.
Frame rate: match the source
Frame rate is where people cause avoidable problems.
| Source | Export at | Notes |
|---|---|---|
| 24 fps | 24 or 30 | Keep 24 if the look is cinematic; 30 is fine for social |
| 25 fps | 25 or 30 | Common in broadcast outside the US |
| 30 fps | 30 | The default |
| 60 fps | 60, or 30 if file size matters | Keep 60 for fast sports action when the platform allows it |
| Variable frame rate (screen recordings, phone clips) | Convert to constant, 30 | Variable rates can cause audio drift in editors |
Rules of thumb:
- Never invent frames. Exporting 24 fps footage at 60 does not make it smoother.
- If your timeline is at one frame rate and the clip is at another, expect judder. Set the timeline to the clip's rate.
- Screen recordings from phones often use a variable rate. Convert them before editing if the audio drifts out of sync.
Audio
Sound is half of a clip, and audio problems look like quality problems.
- Use AAC at 128 to 192 kbps. Higher gains you almost nothing.
- Normalise loudness so the clip is not quieter than neighbouring posts. A clip that is clearly quieter than the feed gets scrolled past.
- Keep speech clear above music. Duck the music by a few decibels under voices.
- If the clip depends on original audio, do not replace it with a trending sound. The original is the point.
Color and look
Export in standard SDR. HDR clips shot on some phones can look flat or too dark once a platform converts them. If your phone records HDR, switch it off for clip sources or convert the file to SDR in your editor. If a clip looks dull after export, the usual cause is a color space mismatch, not a bitrate issue.
A pre-upload checklist
- Play the exported file from start to finish on your phone.
- Check the first second: no black frame, no frozen frame.
- Check the end: no cut-off words, no extra seconds.
- Check captions and logos against the safe zone and the campaign brief.
- Confirm the file is H.264 MP4, 1080 by 1920.
- Upload as a private draft or test on the platform and look at it again.
- Check that audio is in sync from start to end.
Do not skip step 6. It takes a minute and shows you what the platform does to your file.
Mistakes that make clips look worse
- Exporting from an export. Each re-encode loses detail. Keep the project and export from the project once, not from a file you already compressed.
- Using a screen recording as the source. A recording of a clip playing on a screen is a copy of a copy. Get the original file if you are allowed to.
- Over-sharpening. It creates halos that get worse after compression.
- Stretching a 16:9 clip to fill 9:16. Place it in the frame instead.
- Chasing a bitrate number from a forum. Presets from someone else's different source rarely fit yours.
- Ignoring file size limits. Platforms cap file size and length. Check the current limits.
Editor-specific notes
All major editors expose the same controls under different names: resolution, frame rate, codec, bitrate. For app-specific steps, see CapCut clipping workflow, Premiere Pro clipping workflow and DaVinci Resolve clipping workflow. To pick an editor, use best apps to edit clips.
For length, see best clip length for Instagram Reels.
Does quality affect pay?
Not directly. On per-view campaigns earnings equal a rate times verified views, with no bonus for bitrate. But a clean file helps views and approvals indirectly: a blurry or badly framed post gets scrolled past, and a logo that is soft or covered can fail review. For what campaigns advertise, check the live clipping rates, published by FindClout. Those are advertised numbers, not promises.
Join free at app.findclout.com to see campaign requirements, including logo placement and format, before you build your template.
Frequently asked questions
What are the best export settings for clips?
A safe default is MP4, H.264 video, AAC audio, 1080 by 1920 resolution, the same frame rate as the source (often 30 fps), and a bitrate of roughly 8 to 15 Mbps for the video. Platforms re-encode uploads, so confirm current specs on the platform's help page before relying on any preset.
What resolution should I export clips at?
1080 by 1920 for vertical clips. Exporting above that rarely helps on a phone, and the platform will re-encode anyway. Do not upscale small source footage to hit a number, because it adds file size without adding detail.
What frame rate should clips be?
Match the source. If you recorded or downloaded at 30 fps, export at 30. If the source is 60 fps and the action is fast, 60 is fine where the platform allows it. Converting between frame rates can create stutter.
Why does my clip look blurry after uploading?
Platforms compress uploads again. Blur usually comes from low-quality source footage, upscaling, repeated exports, screen-recorded files or a bitrate too low to hold detail. Export once from the best source you have and avoid re-saving the file.
Should I use H.264 or H.265 for clips?
H.264 in an MP4 is the safest choice because it plays everywhere and every platform accepts it. H.265 can give smaller files but compatibility varies, and the platform will re-encode anyway. Default to H.264 unless you have a reason not to.
Get paid for the views you already get.
New campaigns drop in the FindClout Discord first. Join it, then join FindClout free and apply once. We place your page on campaigns that fit it, and you get paid per verified view.
Get Aura Farm in your inbox
One email when a new piece drops: clipping, distribution and where attention is going. No spam.